Advanced Setup
5.4.1
Enable/Disable the Firewall
The Firewall is by default disabled meaning that the configuration is set to
allow all PCs on your network to contact all Internet web sites. You can
configure the HM410dp to block access to certain Internet Websites from
some or all the PCs on your network.
From the
Advanced Setup
menu, click on
Security
. The “Security State”
part displays information about the security settings.
To change the state of the Firewall select
Enabled
and click the
Change State
button.
Note:
To save the Firewall state permanently, you MUST perform a Save
Config. From the left hand menu, select
Advanced Setup > Save
Config
and then click the
Save
button.
A new part named “Firewall Configuration” is now displayed on the
Security
page.
38
1553-ZAT 759 94 Uen B – July 2005
