Configuration Wizard
To configure the HM410dp for DHCP (MER) access mode, follow the steps
below:
1 From
the
Start
page, click the
Configuration Wizard >
button to display
the following page:
2 Select
DHCP (MER)
and click the
Next>
button. The
Confirm
page for
Internet access appears:
3 Click
the
Confirm Changes>
button to proceed or click
Cancel
to exit
the Wizard without saving any settings.
3.2.3 DHCP
(Bridged)
By using the
DHCP (Bridged)
mode the HM410dp will act as a bridge,
meaning that the routing functionality (Firewall, NAT, UPnP, etc) will be
disabled. This access type is suitable if you only want to connect a single
computer to the Internet and want to perform all special functionality in the
computer instead of the built-in capabilities of the HM410dp.
This access type is “Always on” meaning that you is automatically
connected to your ISP whenever you use your Internet connection.
12
1553-ZAT 759 94 Uen B – July 2005
