Configuration Wizard
3
Enter your “PPP Username” and “PPP Password” provided by your ISP
and click the
Next>
button. The
VPI and VCI Setup
page appears:
4
Select either “Use Default” or “Specify manually” depending on
information from your ISP. If you choose “Specify manually” the
following page appears:
5
The default values for VPI (8) and VCI (35) are displayed, but you can
change them if you have received other information from your ISP.
Then click the
Next>
button to display the
Confirm
page for Internet
access:
6 Click
the
Confirm Changes>
button to proceed or click
Cancel
to exit
the Wizard without saving any settings.
3.2.5 PPPoA
The
PPPoA
(or dial-up) access mode is used by the ISP to identify users
and allow them access to the Internet. You have to enter a valid Username
1553-ZAT 759 94 Uen B – July 2005
15
