Command Line Interface
encapsulation
(see section 2.9.3.1 on page 36)
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
cbr
(see section 2.9.3.2 on page 37)
ubr
(see section 2.9.3.3 on page 37)
ubr+
(see section 2.9.3.4 on page 38)
vbr-rt
(see section 2.9.3.5 on page 38)
vbr-nrt
(see section 2.9.3.6 on page 39)
gfr
(see section 2.9.3.7 on page 39)
cdvt
(see section 2.9.3.8 on page 40)
mtu
(see section 2.9.3.9 on page 40)
tx-queue-size
(see section 2.9.3.10 on page 40
oam
(see section 2.9.3.11 on page 41)
oam-ais
(see section 2.9.3.12 on page 42)
oam-rdi
(see section 2.9.3.13 on page 42)
oam-loopback-resp
(see section 2.9.3.14 on page 43)
oam-cont-check
(see section 2.9.3.15 on page 43)
oam-seg-cont-check
(see section 2.9.3.16 on page 44)
oam-perf-monitor
(see section 2.9.3.17 on page 46)
The following commands described in ATM CP Configuratuin Commands
are applicable to an ATM PVC:
stats
(see section 2.8.2.6 on page 32)
In addition, an individual PCV created within a range can be modified by
using the
pvc
command in the ATM Interface Configuration mode.
2.10.6.1 class-range
Description
This command is used to assign a VC class to the PVC
range and therefore, to each PVC in the range.
Syntax
class-range
vc-class-name
vc-class-name
The name of an existing VC class.
no class-range vc-class-name
Removes VC class assignment
Default
No VC class
Modes
ATM PVC Range configuration
62
1553-LZY 214 2655 C 2004-11-24