Ericsson EXN401 User Manual Download Page 144

Page: 144 / 180

SNMP Management

4 SNMP

Management

4.1 Overview

The software includes an SNMP Agent that can respond to SNMP requests
coming from any SNMP client.

In this version, no SNMP variable can be changed through SNMP-SET
requests.

The supported MIB files are the following standard ones:

RFC1213 – MIB for Network Management of TCP/IP-based Internets

•

RFC2737 – Entity MIB (Version 2)

RFC2233 – The Interfaces Group MIB using SMIv2

RFC2515 – Definitions of Managed Objects for ATM Management

RFC2558 – Definitions of Managed Objects for the SONET/SDH
Interface Type

RFC1757 – Remote Network Monitoring MIB (partially)

4.2

Configuring SNMP Management

The community name supported by any SNMP command (

SET

GET

) is

PUBLIC

Change in SNMP settings must be saved in the startup configuration and
the system must be reset to take the change into account.

4.2.1

Enabling Reception of SNMP Requests

To be able to receive any SNMP request, a management entry point must
be created and bound with an interface. For more information on
management configuration, see section 2.11 on page 64.

130

1553-LZY 214 2655 C 2004-11-24

Summary of Contents for EXN401




















































































































































































Search results

Summary of Contents for EXN401

Reviews:

Related manuals for EXN401

Brands by name

Popular brands

Ericsson EXN401, User Manual

Search results

Summary of Contents for EXN401

Reviews:

Related manuals for EXN401

Brands by name

Popular brands