Command Line Interface
Table 4
OAM-Related Information–VP
Name Description
Defect state
Defect state
AIS
End-to-end AIS state
Seg-AIS
Segment AIS state
RDI
End-to-end RDI state
Seg-RDI
Segment RDI state
Continuity Check
End-to-end continuity check state. It can be:
Activation in progress
Deactivation in progress
Not active as sink if feature is not active
FAILED–The printed delay represents the
period during which no CC cell has been
received
SUCCEEDED–The printed delay represents the
period during which CC cells have been
received
Seg. Cont. Check check
Segment continuity check state. It can be:
Activation in progress
Deactivation in progress
Not active as sink if feature is not active
FAILED–The printed delay represents the
period during which no CC cell has been
received
SUCCEEDED–The printed delay represents the
period during which CC cells have been
received
Perf. Monitoring
Performance monitoring state. It can be:
Activation in progress
Deactivation in progress
Not active as sink if feature is not active
If performance monitoring is active, some statistics
are displayed for both directions:
clp0 cells: Cells with CLP bit to 0
clp1 cells: Cells with CLP bit to 1
clp0 + clp1 cells: All cells
In addition, information associated with the last
received PM cell is displayed:
Sent by peer: Total number of user cells (CLP 0
+ 1) sent by the peer; this value is included in
the last received PM cell.
Received: Total number of user cells (CLP 0 +
1) really received by the local when last PM cell
was
received.
2.10.5
ATM PVC Configuration Commands
The following commands described in VC Class Configuration Commands
are applicable to an ATM PVC range:
encapsulation
(see section 2.9.3.1 on page 36)
•
•
cbr
(see section 2.9.3.2 on page 37)
1553-LZY 214 2655 C 2004-11-24
57