Ericsson DT590 User Manual Download Page 80

Page: 80 / 164

Voice Mail Services

MD Evolution – Cordless DT590

For Call Forwarding to your Voice Mailbox when your extension is

idle :

Dial the prefix that corresponds to the desired type of call

forward.

Usually, you will dial one of the following :

To activate an immediate call forward.

To activate a call forward on no-answer condition.

To activate a call forward on busy condition

To activate a call forward on no-answer condition and busy

condition.

Dial 884

This is the usual access number for a system's integrated voice

mail system. If you need more information, contact your system

administrator.

Press to activate the service.

Wait for the Service Acceptance Tone

Press to finish the procedure

Voice Mailbox Greeting Messages

Once a call forward to your mailbox has been programmed, parties

directed to your mailbox will first receive a greeting message.
By default, the greeting message is : "Welcome in the called

extension mailbox". In the case where the call forward is on busy

condition, it is preceded by the following system message : "The

requested extension is busy".
You may personalize this greeting as you wish. Until you have

personalized the greeting, the system will offer you this option

whenever you consult your mailbox.
A new system message then prompts the party to leave a voice

message after the "beep" (except in cases of where the mailbox is

set to answering mode only).

Summary of Contents for DT590





































































































































































Search results

Summary of Contents for DT590

Reviews:

Ericsson DT590, User Manual, Page: 80 / 164

Search results

Summary of Contents for DT590

Reviews: