Ericsson DT590 User Manual Download Page 127

Page: 127 / 164

127

MD Evolution – Cordless DT590

DT590 Adjustments

Message Alert

You can select different signals for mail and voice messages. By

default, there are 16 different signals in the telephone, and

additional signals can be downloaded to the handset.

To set the sound for Message Alert

Route :

Menu » Toolbox » Sound & Alerts » Message alert

Press.

Select the “Toolbox”.

Select the menu item “Sound & Alerts” and confirm.

Select the menu item “Message alert” and confirm.

Select the message alert type : Mail or Voice

Press.

The following options are available :
•

None

•

Click

•

Low 1 and Low 2

•

Medium 1 and Medium 2

•

Mix 1 and Mix 2

•

Melody 1 -6 *)

*) for further details about melodies see chapter “

Ringer Tones or

Melodies

” on page 124

Select the desired sound.

The selected sound is played. The menu options “Low”, “Medium”,

“High” and “Mix” refer to the pitch of the ringing tone.

Press to confirm and save the settings.

Summary of Contents for DT590





































































































































































Search results

Summary of Contents for DT590

Reviews:

Ericsson DT590, User Manual, Page: 127 / 164

Search results

Summary of Contents for DT590

Reviews: