Ericsson DT590 User Manual Download Page 41

Page: 41 / 164

MD Evolution – Cordless DT590

Outgoing Calls

Sometimes you make a call but the person is not available. These

functions will help you in your attempts to establish contact with the

called party.
You can also make a call via the Phone Book, see section “

Phone

Book

” on page 58.

Making Calls

Enter the desired number.

The number is displayed.

Press when the number is correct.

Your phone will go off hook and dial the number. The name of the

called party is displayed if connecting line information is available.

Notes :

Correct a wrong entry by pressing the C/Mute key.

If you decide not to make the call while keying in the

number, press the NO key to stop.

If you receive a call while keying in the number, simply press

the Yes key to answer.

You can make your calls faster by using abbreviated

numbers or dial-by-name. See section “

Abbreviated

Numbers

” on page 43.

Summary of Contents for DT590





































































































































































Search results

Summary of Contents for DT590

Reviews:

Ericsson DT590, User Manual, Page: 41 / 164

Search results

Summary of Contents for DT590

Reviews: