Ericsson DT590 User Manual Download Page 125

Page: 125 / 164

125

MD Evolution – Cordless DT590

DT590 Adjustments

Press.

Select the “Toolbox” tab.

Select the menu item “Sound & Alerts” and confirm.

Select the menu item “Ring signals” and confirm.

Select the ringing signal type : Internal, External, or Callback

and confirm.

The following options are available :
•

Low 1 and Low 2

•

Medium 1 and Medium 2

•

Mix 1 and Mix 2

•

Melody 1 -6

•

User 1 -10

Select the desired sound.

The selected sound is played. The menu options “Low”, “Medium”,

“High” and “Mix” refer to the pitch of the ringing tone.

Press to confirm and save the settings.

The table below lists the names of the melodies.

Melody

Name

Ericsson soundmark

The Black Bear

J.S. Bach - Partita no 3 for violin

Boccherini - Menuet

Rimsky-Korsakov - Flight of the Bumble Bee

J.S. Bach - Badinerie - BWV 1067 Suite no 2

Summary of Contents for DT590





































































































































































Search results

Summary of Contents for DT590

Reviews:

Ericsson DT590, User Manual, Page: 125 / 164

Search results

Summary of Contents for DT590

Reviews: