Ericsson DT590 User Manual Download Page 106

Page: 106 / 164

More Features on your Extension

MD Evolution – Cordless DT590

106

Cancel Reminder Service

719

Dial the prefix "719" assigned to the appointment reminder

service.

Press

All settings are cancelled.

Wait for the Service Acceptance Tone

Press to finish the procedure

Alarm Clock

The phone can be set to remind you at any time within the next

24 hours.

Set Alarm clock

Route :

Menu » Toolbox » Alarm clock

Press.

Select the “Toolbox” tab.

Select the menu item “Alarm clock” and confirm.

The following options are available :
•

Set

•

Clear

Confirm the selected menu item “Set”.

Enter the time the alarm is to be started and confirm.

(HH:MM)

Note :

Use the navigation keys to switch between am and

pm. When your phone displays the time in 24h-format, you

do not have to switch between am and pm.

Summary of Contents for DT590





































































































































































Search results

Summary of Contents for DT590

Reviews:

Ericsson DT590, User Manual, Page: 106 / 164

Search results

Summary of Contents for DT590

Reviews: