Ericsson DT590 User Manual Download Page 14

Page: 14 / 164

Important

MD Evolution – Cordless DT590

•

Do not use battery packs from different types, brands or of

different capacities.

•

The battery is to be stored in a dry cool place, with the ambient

temperature around of +25°C (+77°F) for best performance.

•

The battery continues to discharge a minimal portion of its

power, even if the product is switched off or the battery is

removed.

•

Dispose the battery in accordance with all local regulations,

applicable in your country.

•

Do not allow the metal contacts on the battery to touch another

metal object. This could short-circuit and damage the battery.

•

Do not attempt to take a battery apart.

•

Do not disconnect the battery unless it needs to be replaced.

•

Do power the telephone off before removing the battery.

Warnings

Summary of Contents for DT590





































































































































































Search results

Summary of Contents for DT590

Reviews:

Ericsson DT590, User Manual, Page: 14 / 164

Search results

Summary of Contents for DT590

Reviews: