Ericsson DIALOG 4220 LITE User Manual Download

Page: 32 / 108

During Calls

BusinessPhone – Dialog 4220 Lite / Dialog 3210

Transfer

You have an ongoing internal or external conversation and you

want to transfer the ongoing call.

Dialog 4220 Lite

Inquiry

Press.

Call the third party.

You can transfer the call before answer or wait for answer.

Note:

Make sure, that you are connected to the desired

party. Please read the notes and warnings in section “

Useful

Hints

” on page 91.

Transfer

Press.

Or:

Replace the handset.

The call is transferred. External calls might only be transferred with

the Transfer key, if this state of connection is allowed by the

System programming.

Dialog 3210

Inquiry

Press.

Call the third party.

You can transfer the call before answer or wait for answer.

Note:

Make sure, that you are connected to the desired

party. Please read the notes and warnings in section “

Useful

Hints

” on page 91.

Replace the handset.

The call is transferred. External calls might only be transferred with

the Transfer key, if this state of connection is allowed by the

system-programming.

Summary of Contents for DIALOG 4220 LITE













































































































Search results

Summary of Contents for DIALOG 4220 LITE

Reviews:

Related manuals for DIALOG 4220 LITE

Brands by name

Popular brands

Ericsson DIALOG 4220 LITE, User Manual

Search results

Summary of Contents for DIALOG 4220 LITE

Reviews:

Related manuals for DIALOG 4220 LITE

Brands by name

Popular brands