Ericsson DIALOG 4220 LITE User Manual Download

Page: 43 / 108

BusinessPhone – Dialog 4220 Lite / Dialog 3210

Call Forwarding

Follow-me

If you are in another room, you can still answer your calls by

forwarding them to where you are. To activate Follow-me,

Individual Diversion must be active on your telephone.

Activate Follow-me

Note:

This procedure has to be executed from the

telephone the calls are diverted to.

*21*

Dial.

z *

Dial your number and press.

z #

Dial the new number and press.

Special dial tone.

Press to finish the procedure.

Cancel Follow-me

Follow-me and Individual Diversion can also be cancelled from the

answering position.

#21*

Dial.

Dial your number.

Press.

Dial tone.

Press to finish the procedure.

Summary of Contents for DIALOG 4220 LITE













































































































Search results

Summary of Contents for DIALOG 4220 LITE

Reviews:

Related manuals for DIALOG 4220 LITE

Brands by name

Popular brands

Ericsson DIALOG 4220 LITE, User Manual

Search results

Summary of Contents for DIALOG 4220 LITE

Reviews:

Related manuals for DIALOG 4220 LITE

Brands by name

Popular brands