Ericsson CF888 User Manual Download Page 53

Page: 53 / 75

Note!

Forward On busy

is activated, the waiting call is for-

warded to the number you have specified.

Switching Between Two Calls

Press

YES

to switch between the active call and the call

on hold.

Ending the Current Call

Press

to end the current call. The message

Re-

trieve held call?

appears and a beep sounds.

Press

to end the held call, or press

YES

to return to

the held call.

Note!

If you do not press

YES

within three seconds, the mes-

sage

Retrieve held call?

disappears from the dis-

play. The held call is ended automatically.

Receiving a Third Call

Provided your

Call Waiting

function is activated, you

may receive a third call when you are engaged in one call and

have a second call on hold. You will hear a tone in the ear

piece and the message

Call Wait

appears in the display.

Accepting the Call

Only one call can be on hold at a time. If you wish to accept

the third call you must end one of the existing calls or both.

If you end one of the existing calls:

Press

YES

to accept the waiting call.

If you end both calls:

The phone rings and

Answer?

is displayed. Press

YES

to answer the waiting call.

Rejecting the Call

Press ‘0’ followed by

YES

The third call is cleared. Provided the caller’s network sup-

ports this function, the caller will hear a busy tone.

Note!

Forward On busy

is activated, the waiting call is for-

warded to the number you have specified.

Making a Second Call

Clear the display by pressing

CLR

while the first call is in

progress.

Press

YES

to put the current call on hold. The message

1 on hold

is displayed.

Enter the number you wish to call, or recall it from the

phone book, and press

YES

Another way of making a second call while one call is in prog-

ress is:

Enter the number you wish to call while the first call is

in progress.

Press

YES

to make the call. The message

1 on hold

is displayed.

Connecting Two Calls

If you have one active call and one on hold, it is possible to

connect the two calls.

Some features/menus are operator dependent

Summary of Contents for CF888












































































Search results

Summary of Contents for CF888

Reviews:

Related manuals for CF888

Brands by name

Popular brands

Ericsson CF888, User Manual

Search results

Summary of Contents for CF888

Reviews:

Related manuals for CF888

Brands by name

Popular brands