Ericsson CF888 User Manual Download

Page: 45 / 75

Security

The Card Lock

Your SIM card is protected by a card lock. When you pur-

chase your SIM card, you obtain a PIN code (Personal Iden-

tity Number).

Every time you turn the phone on, you have to enter the PIN

and then press

YES

If the PIN is entered incorrectly three times in succession,

the SIM card will be blocked. This is indicated by the message

Card blocked Unblock?

Should this happen, see

If Your SIM Card Is Blocked

below.

To Change the PIN Code

From the

Access

menu, select

Change PIN

code

Enter the old (current) PIN code and press

YES

Enter the new PIN code and press

YES

At the prompt

Repeat new PIN

enter the new

PIN a second time.

The message

New PIN

confirms that the PIN code has

been changed.

Note!

If the message

Matching error

appears, the new PIN

was entered incorrectly.

If the message

Wrong PIN

appears, followed by

Enter

Old PIN

the old PIN was entered incorrectly.

Changing the PIN2 Code

Depending on the network you use, some services require

that you enter a second PIN code, the PIN2 code.

Select

Change PIN2 code

from the

Access

menu.

Follow the same procedure as described in “To Change the

PIN code”.

Locking the SIM Card

Select

Lock card

from the

Access

menu.

Press

YES

Enter your PIN code and press

YES

The message

Locked

confirms that the card lock is now

activated.

Note!

This function only applies if your SIM card allows you to de-

activate the card lock.

Unlocking the SIM Card

Select

Unlock card

from the

Access

menu.

Press

YES

Enter your PIN code and press

YES

The message

Unlocked

confirms that the card lock is

now deactivated.

Some features/menus are operator dependent

Summary of Contents for CF888












































































Search results

Summary of Contents for CF888

Reviews:

Related manuals for CF888

Brands by name

Popular brands

Ericsson CF888, User Manual

Search results

Summary of Contents for CF888

Reviews:

Related manuals for CF888

Brands by name

Popular brands