Ericsson CF888 User Manual Download Page 46

Page: 46 / 75

If Your SIM Card is Blocked

To unblock the SIM card if you have entered the wrong PIN

(or PIN2) code three times in succession:

Press

YES

Enter your PUK (or PUK2) code (which you will find

in the information from your network operator).

Enter a new 4-to-8 digit PIN (or PIN2) code.

Press

YES

Reenter the new PIN (or PIN2) code to confirm it.

Press

YES

Warning!

If you enter the wrong PUK code ten times in succession,

your card will be permanently blocked. If this happens, you

will have to contact your network operator.

The Phone Lock

The phone lock protects the phone against unauthorized use

in the event of theft. It is not activated when you purchase

the phone. You should, however, activate it as soon as possi-

ble and also change the factory-programmed security code of

0000 to any 3-to-8 digit personalized code.

There are two levels of locking the phone:

•

Full Lock

•

Autolock

If the

Full Lock

is activated, the message

Phone

locked

is displayed briefly, each time the phone is turned

on. The message is followed by the prompt

Enter lock

code

. The user then has to enter a security code and press

YES

to be able to use the phone.

If the

Autolock

is activated, the message

Phone

locked

and the prompt

Enter lock code

will not

appear until a different SIM card is inserted in the phone. Af-

ter the security code has been entered correctly, the phone

can be used with a new SIM card. The user will not be asked

to enter the security code until the original SIM card or a dif-

ferent SIM card is inserted.

Changing the Security Code

From the

Access

menu, select

Phone lock

Change code

and follow the same procedure as

when changing the PIN code.

Locking/Unlocking the Phone

From the

Access

menu, select

Phone lock

The current setting

Full lock

Autolock

Unlocked

is shown in brackets.

Select the required setting.

Enter the security code and press

YES

Phone Lock

is displayed together with the new setting.

Call Restrict

Note!

This feature is supported by your phone, but it is dependent

on your network and/or the network you are roaming in.
The

Call Restrict

service of the cellular network al-

lows you to bar different types of outgoing and incoming

calls to restrict the use of your phone.

Note!

This service may not be available on all networks or may re-

quire a separate subscription.

The following calls can be restricted:

Some features/menus are operator dependent

Summary of Contents for CF888












































































Search results

Summary of Contents for CF888

Reviews:

Related manuals for CF888

Brands by name

Popular brands

Ericsson CF888, User Manual

Search results

Summary of Contents for CF888

Reviews:

Related manuals for CF888

Brands by name

Popular brands