Ergon Crafco SUPER SHOT 125, Parts Manual

Page: 43 / 176

Super Shot 125 DC 70CFM EU Part Manual
Chapter 6 Maintenance Instructions
©2022 by Crafco, Inc. All Rights Reserved
………………..………………………………..….…Maintenance Instructions 6-1
6.0 Maintenance Instructions
This chapter contains all normal maintenance instructions to properly maintain your machine.
6.1 Engine
Refer to the manufacturer
’s operating and maintenance instructions for the engine.
6.2 Air Compressor
Table 6-1 contains the recommended service intervals for the air compressor, as well as the part
numbers for the maintenance kits. Also refer to the manufacturer’s operating and maintenance
instructions for the air compressor.
6.3 Hydraulic System
Check hydraulic fluid daily. See Table 5-1 Preparing the Machine for Start Up Step 3
Change hydraulic filter every 250 hours of machine operation. Replace if necessary.
Change hydraulic fluid every 500 hours of operation.
6.4 Heat Transfer Oil
Check the oil level at the start of every day. See Table 5-1 Preparing the Machine for Start Up Step
4.
Change the oil every 500 hours of machine operation or 1 year, whichever comes first. Failure to
follow this oil change interval will result in machine damage.
6.5 Material Sensor Tube
Check for heat transfer oil in tube every 50 hours of operation. 2 ounces (59.1 ml) required.
Table 6-1 Air Compressor Maintenance Chart
Use Every Kit Description Part No.
2500 Hrs. Maintenance Kit A, Air filter
service kit 45328A
5000 Hrs. Maintenance Kit B, Oil filter
service kit 45328B
10,000 Hrs. Maintenance Kit C, Separator
Service Kit 45328C