15
pair remote
The original remote that comes in the box is already paired to the bed base. No further action is required.
In the event that the remote is not paired with the base, follow the steps below.
Unplug the Power Cord from your power outlet . Wait 1 minute,
then plug it back in to your power outlet . Perform Step 2 within 10
seconds, while the control box light is flashing .
The remote is now paired to the adjustable base . Test all remote
functions . If the remote buttons do not impact the adjustable base
movements, please repeat the process again .
Press and hold the PAIR button on the
back of the remote . The PAIR button
will illuminate and start to flash . When
the PAIR button stops flashing, the LED
light on the control box will stop flashing .
Release the PAIR button .
STEP 1
STEP 3
STEP 2
Power Cord
Power Supply
PAIR REMOTE