10
headboard bracket installation guide (optional)
HEADBOARD BRACKET COMPONENTS
Headboard Bracket (2)
T-Bracket (2)
Spacer
(2)
Long
Bolt (8)
Short
Bolt (10)
Nut (18)
You may now connect your headboard to the attachment plates
using the remaining short bolts and nuts to secure it to the brackets .
The heads of the bolts will face outward . Use a 9/16" socket and 1/2"
wrench to tighten the bolts .
STEP 1
STEP 2
STEP 3
a .) Align the hole in the bracket to the brass sleeve into which the
leg threads . Hold the bracket in place and screw the leg into the
base until it is snug . DO NOT OVERTIGHTEN . Too much force
may cause the leg to spin freely .
b .) Align the tab with the hole in the frame (located towards the foot
of the base) and use a short bolt and nut to secure the bracket .
Make sure the bolt is tight .
Attach the plastic spacer and T-Bracket .
a .) Measure the distance between the mounting holes on the
headboard and install the spacer and attachment plate to
accommodate the headboard .
b .) To install the plastic spacer and attachment plate, you will need
(2) long bolts and (2) nuts . Place the spacer and attachment plate
in the desired location and slip the bolts through the holes with
the head of the bolt facing outward . Position the bolts diagonally
on the spacer . Use the 9/16” socket and wrench to tighten the
bolts .
Use of headboard brackets is optional.
A 9/16” & 1/2” socket and crescent wrench are necessary to complete installation.
HEADBOARD BRACKET INSTALLATION GUIDE (OPTIONAL)
