2
safety precautions and usage statements
FCC Compliance:
This device complies with part 15 of the FCC Rules . Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation .
To comply with the FCC RF exposure requirements, no change to
the antenna or the device is permitted . Any change to the antenna
or the device could result in the device exceeding the RF exposure
requirement and void user’s right to operate the device .
Radio Frequency: 2 .4 GHz
Casters (optional leg accessory) are equipped with locking wheels to
prevent unwanted movement . Even when locked and unable to roll, it
is possible for the casters to slide . Free release head and foot motors
are designed to lower the mattress by retracting only with gravity,
never pulling downwards, which minimizes pinch points .
Product Ratings:
The lift motors are not designed to operate continuously for more than
[2] minutes in an [18] minute time period or approximately 10% duty
cycle . Attempting to circumvent or exceed this rating will shorten the
life expectancy of the product and may void the warranty .
Weight Limits:
This product is not rated to support weights exceeding 850 pounds .
This product is not rated to support weights in excess of 850 pounds
inclusive of the mattress and bedding . The base will structurally
support this weight, provided it is evenly distributed across the bed
base . The adjustable base is not designed to support or lift this amount
in the head or foot sections alone . Exceeding this weight restriction
could damage the bed and/or cause injury and will void the warranty
Acoustics:
The massage function will emit a noticeable tone during operation . As
the massage intensity level is increased, the tone will intensify . The
volume of this tone is directly related to the location environment .
For example, when demonstrated in a show room, the surrounding
environmental noise will cover some of the massage noise . However,
when installed in a home setting with wooden floors, carpeted or not,
the massage volume will be more noticeable .
In normal base operation, the wheels which allow the bed to
maintain its distance from the wall, will make contact with the steel
platform supports of the base creating a contact noise . When
entering, exiting or shifting weight on the base, this contact noise
may be audible as the wheels make contact . This is normal .
Fabric Care:
To prolong the life of your fabric, protect from direct sunlight
whenever possible . For spot cleaning, wipe area with a light damp
sponge or vacuum with a soft brush attachment to remove particles .
Keep at a minimum of 30cm (12 inches) away from direct heat
sources .
For deeper cleaning, blot liquid spills with a clean dry cloth .
Wipe with a clean cloth dampened with warm water . Do not wet
excessively . A soft bristle brush may be used to remove ingrained
soil . Avoid scratching by gentle brushing . Wipe with a clean cloth
dampened with warm water to remove residues . Dry in shade away
from direct heat .
If persistent marks remain visible after cleaning, seek professional
advice
SAVE THESE INSTRUCTIONS.
SAFETY PRECAUTIONS AND USAGE STATEMENTS
