16
To operate the sound bar from a smart device, follow the instructions below.
sound bar setup
STEP 3
STEP 2
STEP 1
Ensure that the Sound Bar Power Cord attached to the Sound Bar is
plugged into a power source . A surge protector is recommended .
Locate Bluetooth® settings on the smart device . Select the
Bluetooth® device that begins with "Ergo sounds” .
Once connected, you may use the smart device to wirelessly
stream music . Use the smart device to control volume level . To
further customize volume levels, see NOTES section below .
NOTES:
•
To switch devices: Turn off Bluetooth® on active device or
select the active device in your Bluetooth® settings and press
“forget this device” . You may now pair another device .
•
To sync a split audio setup: Ensure the same two speaker
models are within effective range of Bluetooth® and are both
powered on . Also ensure that neither speaker has been
connected with other devices . Two audio systems can be
wirelessly connected and synchronously controlled .
Sound bar
Sound Bar
Power Cord
SOUND BAR SETUP
