manualshive.com logo in svg

ergoline PASSION 40/3 PLUS AC, Operating Instructions Manual

Get the most out of your Ergoline PASSION 40/3 PLUS AC with the Operating Instructions Manual available for free download. Discover all the features and functions of this state-of-the-art tanning bed. Download the manual from manualshive.com and start enjoying the ultimate tanning experience at home.

Share
Download
background image

How to use this device 

 

 

58/92 

 

12.16.3

 

Cleaning and maintenance work  

preparation 

Service kit 

 

 1.

 

Allen key 

2.

 

Suction cup for filter panels, acrylic panel and canopy panel 

3.

 

Scratch prevention for the entry area (support cushion for the canopy) 

  

  
  

 

  

 

–

 

The service kit is fitted to the rear wall of the device. 

  

  

  

 

  

–

 

Remove service kit from support. 

  

 

  

 
 
 
 
 
 
 

  

 

–

 

Remove Allen key and suction cup. 

  

  

 

  

 

  

 

Summary of Contents for PASSION 40/3 PLUS AC





























































































Reviews:

No comments

Related manuals for PASSION 40/3 PLUS AC

KBL megaSun space 3000 Operating Instructions Manual preview
megaSun space 3000
Brand: KBL Pages: 52

Brands by name

Popular brands

Load more brands