How to use this device
06/2018
1019682-00
Operating instructions – 47/92
12.12
How to use
NOTE:
Before use the device must always be cleaned and disinfect-
ed! See chapter 12.15 How to clean/disinfect.
12.12.1
How to start
The device is started automatically with an internal or external timer.
NOTE:
See separate document 'Timer Control Module' #1008370-..
in the Technical Documentation folder.
Preparation time
Before the UV lamps turn on, you have a few minutes to prepare yourself.
During the preparation time you can switch on the UV lamps at any time by
pressing the START/STOP button.
–
Remove your clothes and all jewelry.
–
Remove make-up and other cosmetics.
–
Remove glasses. Contact lenses can be worn under the protective
goggles.
–
Put on the protective goggles.
–
Lie down on the bed surface.
–
Close the canopy.
–
Press the START/STOP button.
Settings on start-up:
UV lamps
Facial tanners
Body cooling
Face cooling
Air conditioning system
Audio system
