How to use this device
60/92
The assembly is the same process in reverse order.
WARNING!
Crushing hazard due to improper maintenance!
If the acrylic panel is mounted backwards, there will be a
gap between front panel and acrylic panel.
–
Always replace the acrylic panel as shown: The imprint
on the panel must be next to the foot end at the rear
side of the device.
When assembling the device please note:
–
Carefully lay the acrylic panel in the guide.
–
Remove fingerprints and other soiling carefully.
Removing the canopy panel
–
Remove the screws. First remove the outside screws and then remove
the screws in the middle.
–
Push the canopy panel to the rear with one hand and pull it out of the
front guide with the suction cup.
–
Carefully lay the panel aside on a scratch protection.
