Appendix
80/92
16
Appendix
16.1
Model-No.: JK 103 / 40-3 AC PLUS:
EMC information
16.1.1
Table 201: Guidelines and manufacturer's
declaration – Electromagnetic emissions
The tanning system has been designed for use in the electromagnetic envi-
ronment specified below. The device operator must ensure that it is used in
such an environment.
Emission measurements
Conformity
Electromagnetic environment – Guidelines
HF emissions as per CISPR 11
Group 1
Model-No.: JK 103 / 40-3 AC PLUS uses HF power
mostly for internal functions. Therefore the HF emis-
sions are very low and it is highly unlikely that it will
cause any interference to adjacent electronic equip-
ment.
HF emissions as per CISPR 11
Class B
Model-No.: JK 103 / 40-3 AC PLUS has been designed
for use in all devices, including those in residential are-
as, and it has been determined that it can be used for
residential purposes as soon as it is connected up to a
public mains supply that also supplies buildings.
Harmonics
IEC 61000-3-2
Class A
Voltage fluctuations / Flicker
IEC 61000-3-11
Fulfilled
The obligations listed in Sub-section 6.2.2 of EN 61000-
3-11:2000 must be taken into consideration. In particu-
lar, the 0.14 ohm line impedance must be guaranteed.