How to use this device
06/2018
1019682-00
Operating instructions – 53/92
12.15.1
Cleaning and disinfection of surfaces
Acrylic panel
NOTICE
Do not rub with a dry cloth – danger of scratching!
–
Other cleaning agents, especially concentrated disinfectants or solvents
(e.g. Lysoform, ethyl alcohol or other liquids containing alcohol) must
never be used for cleaning.
Failure to observe this voids all warranty
claims.
Acrylic panel (7) referenced in section 12.15.2 'Cleaning/disinfection plan'
This panel is not in direct contact with the user, however it can become soiled
if the user inadvertently touches it. If such panels are left soiled for an extend-
ed period of time, the heat and light from the tanning lamps may cause the
soiled areas to become permanently stained. Therefore we recommend fre-
quently inspecting and cleaning these panels when necessary, to ensure the
serviceable life of the acrylic.
–
Remove fingerprints and other soiling carefully.
Plastic surfaces
For cleaning the remaining painted and unpainted plastic surfaces, it is best to
simply use warm water and commercially available soft chamois leather.
Never use aggressive cleaning agents containing alcohol or essential oils.
These may lead, in the long run, to damages not covered by the warranty.
During cleaning a slight discoloration of the leather cloth by the rubber seals
should be expected for production-related reasons.
Prevent damage to the acrylic glass and plastic surfaces.
–
Remove rings, watches, bracelets etc. before starting cleaning work.
Filter panels and lamps
UV low pressure lamps and filter panels can be cleaned with a damp
cloth (without additional cleaning agents) where necessary.
UV high pressure lamps can be cleaned with ethyl alcohol where
necessary.
