ergoline ergoselect 4, Operator'S Manual

Page: 70 / 96

9 Control Terminal T
68 ergoselect 4 / 5
9.2.6 Setup
The [ Setup ] key opens the configuration menu where
various program functions can be defined.
Setup
To edit a setting, touch the corresponding menu item on
the display.
Confirm inputs with the [ ] key and exit menus with the
[ ] key.
2. Default Mode
ECG Type
Load Change
Date/Time
RPM
Software Version
Protocols
Training/Test
HR belt no.
Regulation
Beep
Language
Service
Figure 9 – 58: Setup menu, screen 1
Default Mode
Select the operating mode to be activated when the
ergometer is turned on:
• PC Mode
• Ergometry
• Training / Test
• Manual
and confirm the selection with the [ ] key.
Menu
PC Mode
Ergometry
Training/Test
Manual
Default Mode
Figure 9 – 59: Setup – default mode
ECG Type
The selected ECG Type determines the communication
method with the ECG recorder, PC-based ECG system, etc.
To prevent an accidental change, this setting is protected
with a password.
A submenu opens when you touch ECG Type on the display.
Enter the code number "3" via the numeric keypad and
confirm with the [ ] key.
2. Default Mode
EKG Type
Load Change
Date/Time
RPM
Software Version
Protocols
Training/Test
HR belt no.
Regulation
Beep
Language
Service
Service Code
11 22 33
44 55 66
00
77 88 99
(0* ... 9999*)
Service Code
Figure 9 – 60: Setup menu