ergoline ergoselect 4, Operator'S Manual

Page: 38 / 96

8 Control Terminal P
36 ergoselect 4 / 5
8.2 Operating Modes with Control Terminal P
Ergometers with control terminal P support the following
operating modes:
PC Mode
An external device (e.g., an ECG recorder, a PC-based ECG
system) controls the ergometer – no intervention at all is
required at the ergometer.
Ergometry
The ergometer runs an automatic exercise test – some of
the corresponding test protocols are user-configurable and
stored in the system.
(see chapter 8.2.4 “Settings with Control Terminal P” on
page 40)
Manual
The ergometer is controlled manually, i.e., the user per-
forms all load changes via the keypad.
Settings
Used to configure the ergometer.
8.2.1 PC Mode
Use the softkeys on the right and left (
↑ ↓
) to position the
bar cursor on
PC Mode
and confirm the selection with
Select
.
PC Mode
Ergometry
Manual
Settings
Select
Figure 8 – 4: Main menu
The start screen will be displayed – the ergometer is waiting
for commands from the external ECG unit.
0
Watt
--
min
0
/ min
---
/
---
mmHg
0
♥ / min
PC Mode
Figure 8 – 5: Start screen