ergoline ergoselect 4, Operator'S Manual

Page: 15 / 96

4 Setup and Mains Connection
ergoselect 4 / 5 13
4.6 Connecting the Power Cord
Stand in front of the ergometer (looking at the control
panel) and firmly grasp the handlebar with both hands.
Then tilt the ergometer carefully to one side (it is recom-
mended to do this with the help of a second person) and
place it on the floor so that it rests on the handlebar.
Figure 4 – 8: Assembly position
Caution
Equipment Damage
Before connecting the ergometer to the power
line, check that the line voltage corresponds to the
ratings on the type plate.
The type plate is located on the back of the device, at the
bottom.
The connection panel is located on the underside of the
ergometer.
• Connect the power cord to socket 1 .
• Using the supplied strain relief, attach the power cord
to the metal frame 2 .
Return the ergometer carefully to its upright position and
make sure that it is not standing on the power cord.
1
2
Figure 4 – 9: Underside of the ergometer