background image

 

EG_GenLoc354e_1040Q_UG_002_UK 

Page 12 / 69 

 

Descriptions and non-contractual illustrations in this document are given as an indication only. 

ERCOGENER reserves the right to make any modifications. 

Dct_427_02

 

Copyright 

 

The reproduction, transfer, distribution or storage of part or the totality of the contents of this document, in 

any form, without the prior written authorization of ERCOGENER is strictly prohibited. 

 

GenLoc 354e is a trademark of ERCOGENER.  

Hayes is a registered trademark of Hayes Microcomputer Product Inc. The names of products and 

companies mentioned in this document may be names or trademarks of their respective holders. 

 

The use of some products or services described in this document may require a paying subscription. The 

availability of some products or services described in this document may change, depending on the 

configurations and the materials.  

In some countries, restrictions of use of the devices may be applied. For more information, thank you to 

contact your nearest legally qualified local government representative. 

 

ERCOGENER follows a method of continuous development. Consequently, ERCOGENER reserves the right 

to change and improve any of its products described in this document, without notice. 

The contents of this document are provided “as it is”. Except for the applicable obligatory laws, no guarantee 

in any form, explicit or implicit, including but without being limited to it the implicit guarantees of aptitude to 

marketing and of appropriateness to a particular use, is granted concerning the precision, the liability or the 

contents of this document. ERCOGENER reserves the right to revise or withdraw this document at any time 

and without notice. 
 

ERCOGENER cannot be held responsible for any loss of data or income, as well as particular 

damage, incidental, consecutive or indirect. 

 

 

Summary of Contents for GenLoc 354e






































































Reviews: