Ercogener GenLoc 354e User Manual Download Page 11

Page: 11 / 69

EG_GenLoc354e_1040Q_UG_002_UK

Page 11 / 69

Descriptions and non-contractual illustrations in this document are given as an indication only.

ERCOGENER reserves the right to make any modifications.

Dct_427_02

Warning

•

ERCOGENER recommends to read carefully all documents linked to the product GenLoc 354e (User

Guide, Application Notes, Command List) that can be download on our website

www.ercogener.com

•

ERCOGENER cannot be held responsible for:

- The problems due to an inappropriate use of the

GenLoc 354e.

- The problems due to a wrong configuration

- The problems due to a wrong use of an embedded software application developed or supplied by a

third party.

- The dysfunctions due to the absence or a bad coverage of the GSM, GPRS and GNSS networks.

- The dysfunctions if the product is used for the watching of physical persons where human life is

engaged.

•

ERCOGENER reserves the right to modify the functions of its products

"GenLoc 354e" and "EaseLoc"

without previous notice.

- To avoid any risk of electrocution, do not open the casing.

- For any functioning, the casing must be closed.

- No internal part can be repaired by the user. The

GenLoc 354e

must be returned to the factory for any

repair.

- The

GenLoc 354e

must be placed in a normally ventilated area, out of sources of heat.

- In order to guarantee the electromagnetic compatibility, the length of the serial cable, the power supply

cable and the inputs/outputs cable must not exceed 3 meters.

- The

GenLoc 354e

must not be connected directly to the mains supply; a voltage adapter must be used.

SCRAP THE WORN BATTERIES ACCORDING TO INSTRUCTIONS.

Summary of Contents for GenLoc 354e






































































Search results

Summary of Contents for GenLoc 354e

Reviews:

Related manuals for GenLoc 354e

Brands by name

Popular brands

Ercogener GenLoc 354e, User Manual

Search results

Summary of Contents for GenLoc 354e

Reviews:

Related manuals for GenLoc 354e

Brands by name

Popular brands