Erbe 20191-179, Notes On Use

Page: 19 / 216

19
6
How to use
6.1 Only use sterile products
Clean, disinfect and sterilize the product before using it for the
first time and before every subsequent use.
6.2 Checking the product
Before each use, check the product including all the insulation
for signs of physical damage!
If damaged, do not use this product!
6.3 Attaching connecting cable and product
Use one of the connecting cables specified in these instructions
only. The connecting cable must be sterile.
Inspect the connecting cable for damage, particularly the insula-
tion. Do not use it if it is damaged.
Connect the electrode handle and the connecting cable so that
you notice that they snap together.
6.4 Connecting the product and selecting unit settings
Plug the connecting cable into the monopolar socket of the elec-
trosurgical unit.
Only select unit settings that do not exceed the maximum elec-
trical capacity of the product (V
p
max or kV
p
max) as this could
damage the product. Information on selecting appropriate unit
settings is provided in the User Manual of the electrosurgical unit
(for Erbe electrosurgical units, read the "Accessories" section).
OBJ_DOKU-189744-008.fm Seite 19 Mittwoch, 5. August 2020 4:22 16