Erbe 20191-179, Notes On Use

Page: 20 / 216

20
6.5 Selecting a Trocar
Select a trocar for instruments with diameter 5 mm.
6.6 Using the product
Open the valve for the trocar sleeve completely. Push the distal
end of the instrument carefully through the trocar sleeve. Exer-
cise no force.
Do not kink the hook when introducing it into or removing from
the trocar sleeve.
Flash-overs, activation in the trocar or without visual control of
the distal end of the instrument can cause unwanted thermal in-
juries to the patient. Therefore, check that the distal end of the
instrument protrudes at least 10 mm out of the trocar before
each activation.
When you place the product in the instrument sieve, make sure
that the distal end does not slip into the holes of the sieve. The
distal end could be damaged when the sieve is transported or
the product is removed.
7
Cleaning, disinfection, sterilization
7.1 Safety instructions for processing
Not suitable for manual cleaning and disinfection.
Suitable for precleaning using an ultrasonic bath.
Never use sharp objects for cleaning.
Disinfectants must be rinsed off thoroughly after use.
Maximum air pressure during drying: 2 bar.
Maximum water pressure during rinsing: 2 bar.
OBJ_DOKU-189744-008.fm Seite 20 Mittwoch, 5. August 2020 4:22 16