16
ERBAUER 216MM (8”) SLIDING MITRE SAW
5) Pull the guard arm (12) toward the rear of the
machine .
Warning:
Make sure the screw (13) in the
rear of the bracket (14) (See fi g. 17).
6) Lower the blade guard (1) and verify that the
operation of the guard does not bind or stick.
7) Rotate the cover plate (5) back to its original
position until the slot in the cover plate engages
with the cover plate screw (2). Tighten the screw
with a Phillips screwdriver (See fi g. 18).
Warning:
Make sure the cover plate screw
(2) is tightened in position before attempting
to use this mitre saw.
8) Be sure the arbour lock is released so the
blade turns freely.
Warning:
●
To avoid injury, never use the saw without the
cover plate secure in place. It keeps the arbour
bolt from falling out if it accidentally loosens, and
helps prevent the spinning blade from coming off
the saw.
●
Make sure the collars are clean and properly
arranged. Lower the blade into the lower table
and check for any contact with the base or the
mitre table by spinning the blade manually.
11. Aligning the laser beam
Warning:
For your own safety, never
connect the plug to power source outlet
until all the adjustment steps are complete and
you have read and understood the safety and
operational instructions. The laser beam must
always be correctly aligned with the blade to
ensure straight, even cutting (See fi g. 19, 20).
Your tool is equipped with the Laser guide cutting
guide using Class II laser beam. The laser beam
will enable to preview the saw blade path on the
stock to be cut before starting the mitre saw.
This laser guide is powered by the transformed
alternating current supply directly through the
power lead. The saw must be connected to the
power source and the laser on/off switch must be
turned on for the laser line to show.
Warning:
AVOID DIRECT EYE CONTACT
Laser radiated when laser guide is turned
on. Avoid direct eye contact. Always unplug the
mitre saw from power source before making any
adjustments.
Laser ON/OFF switch
Fig 19
Fig 18
5
2
1
Fig 17
1
12
5
13
14
