Instruction manual for installation and operation of automatic pellet burner “ERATO GP20+”
(Version :
02.02.2010 10:36
)
p.
16/50
•
In case that the heat consumer is not hot water boiler, than appropriate
norm and requirements should be governed at preparing the installation
project;
•
Fire safety requirements;
•
To the power supply - EN 60335-1/1997 - “
Household and similar
electrical appliances – safety. Part 1. General requirements
”;
4.3.
Overall and attachment dimensions of the burner’s main unit
The installation process of the burner should consider the requirements,
described above, as well the dimensions of the unit, shown on the
following figures.
Figure 4.1.
Isometric view of the main unit of the burner
–
side view
;
Figures 4.2, 4.3. and 4.4. show the overall and detailed dimensions of the
main unit of the burner, which should be considered at preparing a project
and installation of the appliance.
