background image

Contents

1 sAFetY

1.1 Please read and keep in a safe place

 Please read through these instructions carefully before 

installing or operating. Following the installation, pass the instructions 
on to the operator. This unit must be installed and commissioned 
in accordance with the regulations and standards in force. These 
instructions can also be found at www.docuthek.com. 

1.2 explanation of symbols

 = Action 

= Instruction

1.3 Liability

We will not be held liable for damage resulting from non-observance 
of the instructions and non-compliant use.

1.4 safety instructions

Information that is relevant for safety is indicated in the instructions
as follows:

 DAnGeR

Indicates potentially fatal situations.

 WARnInG

Indicates possible danger to life and limb.

 CAUtIon

Indicates possible material damage.

All interventions may only be carried out by qualified gas techni-
cians. Electrical interventions may only be carried out by qualified 
electricians.

1.5 Conversion, spare parts

All technical changes are prohibited. Only use OEM spare parts.

1.6 Instructions provided by the company

Instructions provided by the company or individual responsible for the 
manufacture and/or overall installation of a complete system incor-
porating MAXON burners take precedence over the installation and 
operating instructions provided by MAXON. If any of the instructions 
provided by MAXON are in conflict with local codes or regulations, 
please contact MAXON before initial start-up of equipment.

EN – www

.docuthek.com

VALUPAK-II, 

low temperature burners

1 Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

2 Checking the usage . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
3 Application requirements  . . . . . . . . . . . . . . . . . . . . . . . . 2

4 Installation  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

5 Start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
6 Stop. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

7 Commissioning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

8 VALUPAK package and back pressure  . . . . . . . . . . . . .4
9 Maintenance  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

10 Technical data  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
11 Logistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
12 Certification. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
13 Disposal  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

oPeRAtInG InstRUCtIons

· Edition 11.22 · 32-00270 · EN

Summary of Contents for Maxon VALUPAK-II









Reviews: