Rev. A 01/00
Copyright © 2000, Tjernlund Products, Inc. All rights reserved.
P/N 8504025
NOTE:
The VP-2 and VP-3 Water Heater Vent Packages use a solenoid valve as part
of the safety interlock circuit. The solenoid valve is installed in the gas supply piping
to the water heater’s thermostat/valve. To save installation time, do not pipe gas to
water heater before installing the gas solenoid valve.
OPTIONAL PILOT SAVER KIT AVAILABLE
The optional Pilot Saver Kit (P/N: 950-2061) allows for Solenoid Valve to be installed in
1/2” burner gas line from water heater gas valve to burner, eliminating pilot outages
caused by power interruptions.
OWNERS INSTRUCTIONS
THESE INSTRUCTIONS MUST REMAIN
WITH EQUIPMENT
DO NOT DESTROY
ALWAYS FOLLOW WATER
HEATER MANUFACTURER’S
INSTRUCTIONS FOR PROPER
OPERATION OF HEATER AND
RE-LIGHTING OF PILOT
WATER HEATER VENT PACKAGE
For Natural Gas or LP
MODELS
VP-2 For Millivolt Water Heaters up to
60,000 BTU/hr
VP-3 For Millivolt Water Heaters from
60,000 to 120,000 BTU/hr
Patented
TJERNLUND PRODUCTS, INC.
1601 Ninth Street • White Bear Lake, MN 55110-6794
PHONE (800) 255-4208 • (651) 426-2993 • FAX (651) 426-9547
Visit our web site • www.tjernlund.com
