Installation Instructions
for Burner Igniter Kit SDE362
Replaces:
Whirlpool 279311 Robertshaw 41-311 Maytag LA1021
To replace round igniter, follow steps below and refer to Figure 1.
1. Unplug dryer or disconnect power.
2. Remove lower front toe panel or full front panel, depending on your model.
3. Shut off gas supply.
4. Remove the brass nut (union) located between the burner and shut off valve.
5. Remove the two (2) screws holding the burner base to the cabinet base.
6. Keep these two (2) screws, as they will be reused.
7. Remove the WHITE (FS2) wire and the BLUE (FS1) wire from the sensor.
8. Pull apart the connectors with the BLUE and BLACK wires coming from the gas
valve to the cabinet wiring harness.
9. Remove burner assembly from the dryer.
Electrical Shock Hazard
Disconnect power before servicing.
Replace all panels before operating.
Failure to do so can result in death or electrical shock.
This new igniter may be
different from your
original igniter.
Note:
Igniter is fragile, Do not remove igniter from this foam
protector by the wires. Hold by the porcelain block and lift up.
Installation Instructions
for Burner Igniter Kit SDE362
Replaces:
Whirlpool 279311 Robertshaw 41-311 Maytag LA1021
To replace round igniter, follow steps below and refer to Figure 1.
1. Unplug dryer or disconnect power.
2. Remove lower front toe panel or full front panel, depending on your model.
3. Shut off gas supply.
4. Remove the brass nut (union) located between the burner and shut off valve.
5. Remove the two (2) screws holding the burner base to the cabinet base.
6. Keep these two (2) screws, as they will be reused.
7. Remove the WHITE (FS2) wire and the BLUE (FS1) wire from the sensor.
8. Pull apart the connectors with the BLUE and BLACK wires coming from the gas
valve to the cabinet wiring harness.
9. Remove burner assembly from the dryer.
Electrical Shock Hazard
Disconnect power before servicing.
Replace all panels before operating.
Failure to do so can result in death or electrical shock.
This new igniter may be
different from your
original igniter.
Note:
Igniter is fragile, Do not remove igniter from this foam
protector by the wires. Hold by the porcelain block and lift up.
Handle replacement ignitor with care - fragile
Handle replacement ignitor with care - fragile
Round ignitor
Round ignitor
