13
14
Exit & Entry Delay
When the system is armed with Exit/Entry Delay enabled, Sensors on an active zone
will not trigger an alarm status until after the Exit/Entry Delay time set has expired. This
enables the system to be armed from within the property (at the Control Panel) giving
time for the user to exit the property without triggering an alarm.
Exit Delay Time
If the Exit Delay is set to 30 seconds for example, the system would allow you 30
seconds to leave the area before the system is armed. The ‘beep’ is sounded once every
second to remind you to leave. The pace of the reminder sound will speed up in last 15
seconds. Exit Delay applies to all Sensors in any mode.
Entry Delay Time
If the Entry Delay is set to 15 seconds for example, the system would allow you 15
seconds to disarm the system before it enters into alarm status.
Entry delay applies only
to Single Zone Delay Sensors.
If a Sensor is set to Normal or Home Mode zone, the alarm will sound instantly.
If a Sensor is set to Single Zone Delay, the alarm will sound as per the Entry Delay set.
To apply this function set the zone mode of the Sensor to single zone delay. For details
refer to ‘Zone Mode of Sensor’ as shown on page 9. This setting activates an Entry
Delay Setting.
Sensor
Exit Delay (if 30s)
Entry Delay (if 15s)
Normal and home mode zone
30s
Does not apply - Alarms
immediately
Single delay zone
30s
15s
24-H zone
Always armed
Alarms immediately
Disarm Code
The default disarm code is 1234. It is suggested that the system administrator changes
the passcode at the time of system set-up.
Duress Code
The default duress code is 1111. The Alarm will disarm as usual but the Control Panel will
also silently send an SMS text: “Duress code alarm” and then call the pre-programmed
telephone number allowing the user to listen-in to the property.
Setting through SMS
Non-smartphone App users can set-up their system by sending the related SMS text
command codes to the SIM card in the Control Panel.
Item
SMS Command Code
SMS menu
?, ??, ???
System setting enquiry
00
Disarm
0
Arm
1
Home Mode (Part Arm)
2
Two-way talk
3
Call back to leave a 10-second voice memo
4
Store emergency telephone numbers
5
Store emergency SMS numbers
6
Store speed dial numbers
8
Change zone name
901~950
Set exit delay time
11
Set alarm volume and ringing time
12
Change disarm passcode
13
Set entry delay time
14
Change duress code
15