19
20
Fitting a Pet Friendly PIR Motion Sensor
lmportant:
Avoid installing Sensors facing windows or near to heat sources, such as;
extraction units, air-conditioning, a microwave oven, refrigerator, etc. Avoid placing two
Motion Sensors opposite to each other and within each others detection range.
ON
2-2.2m
Ground
Step 1:
The ideal mounting height is between 2 and 2.2 metres of ground level.
ON
2-2.2m
Ground
Step 2:
Press the test button twice and walk from left to right in the room. The status
indicator will blink once when motion is detected.
ON
2-2.2m
Ground
Note:
This PIR motion Sensor can be mounted using the bracket and fixing kit or with the self-
adhesive pads supplied.
Pairing/Deleting Accessories
The included accessories have been paired with the Control Panel by default. To pair
new accessories, follow the instructions below:
Pairing a New Remote Control or Sensor
Enter the disarm password (default: 1234), press the
[ ]
button on the Control Panel,
the Sensor will trigger once.
When a beep is heard from the Control Panel, the Sensor is paired successfully. If two
beeps are heard, the Sensor was already paired.
Note:
To pair additional Sensor types please refer to the related user manual.
Press any button on
the remote control
Press the test button
more than twice
Separate the
transmitter and the
magnet by over 2cm