3
4
INTRODUCTION
When triggered by the activation of a Sensor, Detector, Remote Control or Personal Alert
Button the Control Panel sounds the internal siren and sends SMS texts to all stored
telephone numbers. When texting is finished the Control Panel will call out to the stored
numbers and play the pre-recorded alarm message. If an optional external Siren is
installed the Control Panel will also send a trigger signal to the Siren and the Siren will
sound and flash.
SOS
When you receive a phone call from the Control Panel you will hear your pre-recorded
alarm voice message. Once the message has been played you can remotely control the
system with your smartphone by pressing the operational numbers as shown below
.
Operation
Function
0
Disarm
1
Arm
6
Turn off siren
9
Turn on siren
*
Two-way talk
#
Hang up
To record/store an alarm voice message of up to 10 seconds duration, enter the disarm password
(default setting: 1234), then press
[ ]
and
[ ]
.
Note:
Alarm Voice Message:
This is the message played when you pick up an emergency call.
Voice Memo
This feature is for recording/playing back personal messages
Accessories
Remote Control
SOS
Arm
Disarm
Status Indicator
Part Arm
(Home Arm)
Button
System Status
Press once to
arm
. The Control Panel siren beeps once to confirm the system is
armed.
Press once to
disarm
. The Control Panel siren beeps twice to confirm the system
is disarmed.
Press once to
Part Arm (Home Arm)
. After 3 seconds, the siren beeps once to
confirm the system is in Home Mode.
Note:
Sensors set to Part Arm will not be active when the system is triggered.
The Control Panel will sound on-site and the idicator will flash. System users will
receive SMS text and telephone calls.
Press the
[ ]
button. After the indicator on the Remote Control blinks once,
press
[ ]
button within 3 seconds to
silently arm
the system.
Press the
[ ]
button. After the indicator on the Remote Control blinks once,
press
[ ]
button within 3 seconds to
silently disarm
the system.