ERA E2 Instruction Manual Download Page 15

Door/Window Sensor

Power Supply          

DC 6V (CR2032 lithium battery x 2pcs)

Static Current

<35 uA

Alarm Current 

<40 mA

Transmitting Distance        

<80 m (open area/no interference)

Radio Frequency      

433 MHz

Housing Material            

ABS Plastic

Operating Condition  

Temperature  -10°C~+55°C
Relative Humidity  <80% (non-condensing)

Transmitter Dimensions  

71 x 31.5 x 15 mm (L x W x H) 

Magnet Dimensions

71 x 12.5 x 15 mm (L x W x H)

Pet Friendly PIR Motion Sensor

Power Supply

DC 3V (AA 1.5V LR6 battery x 2 pcs)

Static Current

<50 uA

Alarm Current

<9.5 mA

Detection Scope  

8m/110°

Transmitting Distance

<80 m (open area/no interference)

Radio Frequency  

433 MHz

Housing Material 

ABS Plastic

Operating Condition

Temperature  -10°C~+55°C
Relative Humidity  <80% (non-condensing)

Detector Dimensions

100 x 59 x 43 mm (L x W x H)

Bracket Dimensions

52 x 30 x 26.5 mm (L x W x H)

PRODUCT GUARANTEE *

We at ERA firmly believe in the quality of our goods. Our technology achieves outstanding 

performance and durability and we can therefore offer, in addition to your statutory rights, an 
additional limited guarantee. In the event of any material defects in any product manufactured by 
us due to faulty design, materials and/or workmanship, and which arise following correct installation 
and during normal use in accordance with our instructions, as included in the product packaging, 
within the period of two years from the date of purchase, we will either repair, provide a replacement, 
substitute with an equivalent product free of charge from our then current range or refund in full the 
amount paid for the product at point of purchase.

Conditions

 

In order to take advantage of our guarantee, you must comply with the following conditions:- 

1. This limited guarantee is not transferable and is extended only to, and is solely for the benefit of, the original 

purchaser of the product. Please retain your dated sales invoice as proof of purchase and forward this to us if you 
wish to make a claim under this guarantee. 
2. Products must be installed, used and maintained in accordance with our instructions otherwise the guarantee will 
be invalidated. 

3. The product must not be damaged or modified in any way nor must it have been subjected to any unauthorised 

repairs.

Exclusions

 

This guarantee does not cover:- 
1. Periodic maintenance, repair and replacement of parts due to fair wear and tear. 
2. Abuse or misuse, including but not solely limited to the failure to use this product for its normal purposes or in 
accordance with ERA’s instructions on usage and maintenance. 
3. Failure of the product arising from incorrect installation or use not consistent with the instructions supplied and the 
cost of any removal or installation of products. 

4. Accidents, Acts of God, lightning, water, fire, public disturbances, improper ventilation, voltage fluctuations or any 

cause beyond the control of ERA (Force Majeure). 

5. Unauthorised modifications carried out to the product.

 

6. Damage caused by incorrect/improper use of supplied batteries. 
7. Alteration to, deletion, removal or illegibility of the Serial Number as shown on the Product Label. 
8. Consumables: any damages so caused by the use of batteries not supplied by ERA. 
9. Repair or attempted repairing by bodies who are not ERA authorised repairers. 
10. Neglect. 
11. The loss of any stored data on your product.

This guarantee is in addition to your contractual and statutory rights and does not affect your statutory rights

To make a claim

 

Please contact Customer Support either by telephone on 0345 257 2500 or email [email protected], with 

full details of your claim.  If your claim satisfies our Conditions and is not subject to any of our Exclusions, we will agree 

with you the repair, replacement, substitution or refund of payment of goods.  For product returns you will be issued 
with a Return Authorisation Number (RAN).  Please note: Returns will not be accepted unless accompanied by a RAN. 

 

*Terms and conditions apply.

Summary of Contents for E2

















Reviews: