Equus VI DIS, User Manual

Page: 289 / 317

286
Voice control
Navigation mode
Muting and reactivating navigation
announcements
You can mute and reactivate the navigation
announcements using the voice control
system. The following commands are
available for this:
“Guidance voice off”
“Guidance voice on”
Press the

button on the steering
wheel and say the desired command
after the signal tone.
The system mutes or reactivates the
navigation announcements.
Redefining a navigation route
The following commands are available for
redefining the route for the route guidance
session:
“Reroute”
“Reroute shortest distance”
“Reroute minimize freeway”
“Reroute minimize toll road”
“Reroute shortest time”
Press the

button on the steering
wheel and say the desired command
after the signal tone.
The route will be redefined.
Setting a detour
You can use the following commands to set
a detour for a section of your route:
“Detour”
“Detour 1 mile” or “Detour 1 kilometer”
“Detour 2 miles” or “Detour 2 kilometer”
“Detour 5 miles” or “Detour 5 kilometer”
“Detour 10 miles” or “Detour 10
kilometer”

The usage of “miles” or “kilometer” depends
on the map display setting, see section
“Map display settings” on page page 258.
Press the

button on the steering
wheel and say the desired command
after the signal tone.
The corresponding detour will be set.
Map display
Calling up the map display
The map display is called up using the
command
“Display map” .
Press the

button on the steering
wheel and say the command “Display
map” after the signal tone.
You will see the map.
After calling up the map, you have various
options for adapting it to the current
conditions using the voice control system.
Zooming in/zooming out step by step
You can use the commands “Map zoom in”
and “Map zoom out” to set the desired map
scale step by step.
Press the

button on the steering
wheel and say the desired command
after the signal tone.
The map will be zoomed to the next
map scale.