125
AUX mode
Signal sources
Connection of the iPod
®
connection
cable without the iPod
®
connected at
the other end will still trigger the system
to change to AUX mode. In such case,
noise may occur due to an open end
connection. Please disconnect and
store the iPod
®
connector cable in a
safe place when iPod
®
is not in use.
If the Hyundai logo persists on the
iPod
®
display when disconnecting the
iPod
®
from the system, please upgrade
to the latest iPod
®
firmware.
Notes on connecting an AUX signal
source
You can connect an audio or video
signal source to the AUX socket using a
commercially available cable with a 3.5
mm (0.14") jack.
AUX operates properly only when the
external audio or video signal source
connected is operational.
Connection of the AUX connection
cable without the AUX signal source
connected at the other end will still
trigger the system to change to AUX
mode. In such case, noise may occur
due to an open end connection. Please
disconnect and store the AUX
connection cable in a safe place when
the AUX signal source is not in use.
When the power of the AUX signal
source is connected to the vehicle's
power jack, noise may occur on the
display with some devices. In this case,
disconnect from the power jack and use
the internal power source of the device.
After connecting an iPod
®
mobile digital
device or an USB memory stick
If PHONE, INFO or Navigation mode is
displayed before connecting the signal
source, the display does not switch to AUX
mode automatically.
But AUX is automatically the active audio
source and playback of the respective
signal source starts if it contains playable
files.
If DISC, FM/AM or XM
®
Satellite Radio
mode is displayed before connecting the
signal source, the display switches
automatically to AUX mode.
AUX is automatically the active audio
source and playback of the respective
signal source starts if it contains playable
files.
After connecting an AUX audio signal
source
If PHONE, INFO or Navigation mode is
displayed before connecting an AUX audio
signal source, the display does not switch
to AUX mode automatically.
But AUX is automatically the active audio
source and playback starts as soon as the
signal source transmits an audio signal.
If DISC, FM/AM or XM
®
Satellite Radio
mode is displayed before connecting the
AUX audio signal source, the display
switches automatically to AUX mode.
AUX is automatically the active audio
source and playback starts as soon as the
signal source transmits an audio signal.
Summary of Contents for VI DIS
