QuadroE1/T1 Manual II: Administrator's Guide
Administrator's Graphical User Interface
QuadroE1/T1; (SW Version 3.0.x)
75
LAN Services Menu
Fig. II-112: LAN Services menu in Dynamo theme
Fig. II-113: LAN Services menu in Plain theme
DNS Settings
The DNS Settings page gives the possibility to setup a name
server for the Quadro. It offers the following components:
NameserverAssignment radio buttons:
•
Dynamically by provider selection automatically
configures the assignment of the name server address from
the provider party.
•
Fixed Nameserver address is a manually selected name
server. The Nameserver text field requires the IP address
of an external name server. The Alternative Nameserver
text field requires the IP address of the secondary name
server. The Alternative Nameserver is used if the main
name server cannot be accessed.
Fig. II-114: DNS Settings page
DHCP Settings for the LAN Interface
The DHCP Settings page gives the possibility to enable a
DHCP server and control the Quadro user’s LAN settings. Thus
Quadro LAN users will be provided automatically with the
following settings using the configured parameters:
•
IP addresses
•
NTP (corresponds to the Quadro’s IP address)
•
WINS server
•
Nameserver (corresponds to the Quadro’s IP address)
•
Domain name
The DHCP Settings page offers the following input options:
Enable DHCP Server activates the DHCP server on Quadro.
IP Address Range defines a range of IP addresses that will be
assigned to the Quadro LAN users. The IP range must be at
least six, otherwise the “Address Range too small” error will
prevent saving. The “Address Range too large” error occurs if
the IP range is greater than 254.
WINS Server defines a WINS server IP address for the Quadro
LAN users.
View DHCP Leases leads to the page where the DHCP leased
LAN IP addresses are listed.
Fig. II-115: DHCP Settings page for LAN interface
