Epygi QUADRO E1 Administrator'S Manual Download Page 63 | Manualshive

Page: 63 / 87

background image

QuadroE1/T1 Manual II: Administrator's Guide

Administrator's Graphical User Interface

QuadroE1/T1; (SW Version 3.0.x)

63

VoIP Carrier Wizard

VoIP Carrier Wizard is used to define access codes for available VoIP Carrier account which will particularly allow to reach users over IP-PSTN
providers or to call to the peers registered on the certain SIP servers by dialing simple digit combinations.

For each configured VoIP carrier, wizard creates specific IP-PSTN routing rule in the

Local

240H

Call

Routing table. Additionally, a virtual extension will be automatically generated in

241H

User Management,

will be registered on the defined VoIP

Carrier’s SIP server and on behalf of which the calls from Quadro’s users towards the created VoIP Carrier will be placed.

VoIP Carrier Wizard – Page 1 provides a possibility to
describe VoIP carrier:

When Vonage is selected in VoIP Carrier drop down list, SIP
Server and Port will be already predefined in the next page.
Manual selection allows to set up the VoIP Carrier settings
manually.

Description field allows to insert an optional description of the
VoIP Carrier.

Fig. II-94: VoIP Carrier Wizard page

VoIP Carrier Wizard – Page 2 is used to define VoIP Carrier
Settings. Page contains following components:

1. VoIP Carrier Common Settings

Account Name text field requires a username for
authentication on the defined SIP server.

Password requires a password for authentication on the
defined SIP server.

Confirm Password requires a password confirmation. If the
input is not corresponding to the one in the Extension
Password field, the error will appear: “Incorrect Password
confirm”.

SIP Server text field requires an IP address or the hostname

of the SIP server destination party is registered on.

SIP Server Port text field requires the port number of the SIP

server destination party is registered on.

«
...
61
62
63
64
65
...
»

Summary of Contents for QUADRO E1
























































































Reviews:

No comments

Related manuals for QUADRO E1

Brand: Lantronix Pages: 2

Brand: Chipkin Pages: 30

Brand: Quadro Pages: 54

GW1102-2DRS-485-TB-P

Brand: 3onedata Pages: 3

Brand: OpenVox Pages: 76

Brand: ZyXEL Communications Pages: 5

Brand: VBOX Pages: 11

Brand: Internode Pages: 12

Brand: Zoom Pages: 48

Brand: Zoom Pages: 72

Brand: BossPac Pages: 26

Brand: QUANTUM X Pages: 56

Brand: 2Wire Pages: 30

Brand: David Clark Pages: 11

Brand: David Clark Pages: 13

Brand: ZyXEL Communications Pages: 505

Brand: Bryan Boilers Pages: 56

Brand: ZyXEL Communications Pages: 332

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands