manualshive.com logo in svg

Epson TP3, Manual, Page: 70 / 96

Share
Download
Epson TP3 Manual Download Page 70

Operation  3. TEACH/T1 Mode 
 

60 

RC700-A option TP3  Rev.8

 

To resume the program: 

Tap  the operation key (Continue), and then press the <EXE.> key while the Enable 
Switch is ON with the confirmation window open. 
The program will resume from the paused position. 

To abort the program: 

Press the Emergency Stop switch.    The program is also aborted when an error occurs. 
The moving robot stops. (Quick Pause) 

Pause by Open/Close status of the safeguard: 

The program pauses according to open/close status of the safeguard. 
The moving robot immediately stops. (Quick Pause) 

To resume the program paused by Open/Close status of the safeguard: 

Release the latched status of the safeguard interlock.  Then, tap the operation key 
(Continue) and press the <EXE.> key while the Enable Switch is ON  with the 
confirmation window open. 

 

 

WARNING 

■

 

Before performing the program verification, check that the robot system operates 
normally by using the EPSON RC+ debug function. 
For details on the EPSON RC+ debug function, refer to the EPSON RC+ User’s 
Guide. 
If debugging is insufficient, the robot may cause unintended motion.  This is 
extremely hazardous and may cause serious bodily injury or severe damage to the 
robot. 

■

 

Before performing the program verification, make sure that no one is in the robot’s 
operation area. 
The robot automatically starts moving as the program verification starts.  If the 
operator is in the robot’s operation area, it is extremely hazardous and may cause 
serious bodily injury or severe damage to the robot. 

 

 

CAUTION

 

■

 

When abnormal operation such as collision with peripherals is predicted, release 
the <EXE.> key immediately and stop the robot.   
The robot also can be stopped by releasing the Enable Switch, or pushing the 
switch harder. 

■

 

After performing the program verification, be sure to follow the points below: 

-  Check the changed parts in software before supplying power.   
-  Perform  the  function test to check whether the robot system operates 

normally. 

 

 

Summary of Contents for TP3

































































































Reviews:

No comments