Epson TP3 Manual Download Page 29

Page: 29 / 96

Functions & Installation 5. Jog Keys and EXE. Key

RC700-A option TP3 Rev.8

5. Jog Keys and EXE. Key

EXE. Key

Jog Keys

EXE.

Key

Description

To perform the following operations, press the Enable Switch and the

<EXE.> key at the same time.

To execute the commands in TEACH mode

To execute the program in TEST mode

The jog keys are only available in TEACH mode.

Jog

Key

Description

Joint mode

Jogs J1

Other than

Joint mode

Jogs in X direction of the rectangular coordinate

system

Joint mode

Jogs J2

Other than

Joint mode

Jogs in Y direction of the rectangular coordinate

system

Joint mode

Jogs J3

Other than

Joint mode

Jogs in Z direction of the rectangular coordinate

system

Joint mode

Jogs J4 or J7

Other than

Joint mode

Rotates the tool coordinate system around the Z

axis of the rectangular coordinate system.

Joint mode

Jogs J5 or J8 (additional axis)

Other than

Joint mode

Rotates the tool coordinate system around the Y

axis of the rectangular coordinate system. Or

jogs the S axis (additional axis).

Joint mode

Jogs J6 or J9 (additional axis)

Other than

Joint mode

Rotates the tool coordinate system around the X

axis of the rectangular coordinate system. Or

jogs the T axis (additional axis).

Summary of Contents for TP3
































































































Search results

Summary of Contents for TP3

Reviews:

Epson TP3, Manual, Page: 29 / 96

Search results

Summary of Contents for TP3

Reviews: