Epson TM-T70II-DT, Technical Reference Manual

Page: 99 / 238

Chapter 2 Setup
99
2
Connecting the Cash Drawer
Whe n u s ing a cash drawer, co nn ec t t he cash drawer.

Use t he cash drawer ha n dled by EPSON or yo u r dealer.
Connecting the Drawer-kick Cable
Co nn ec t t he co nn ec t or of t he drawer-k i ck cable t o t he pr int er.
WARNING

Specifications of drawers differ a great deal, depending on makers or models.
When you use a drawer other than the specified, make sure its specifications meet
the following conditions.

Otherwise, devices may be damaged.

The load, such as a drawer-kick solenoid, must be connected between pins 4 and 2 or
pins 4 and 5 of the drawer-kick connector.

When the drawer open/close signal is used, a switch must be provided between
drawer-kick connector pins 3 and 6.

The resistance of the load, such as a drawer-kick solenoid, must be 24  or more or
the input current must be 1A or less.

Be sure to use the 24V power output on drawer-kick connector pin 4 for driving the
equipment.

Use a shield cable for the drawer connector cable.

Two driver transistors cannot be energized simultaneously.

Leave intervals longer than 4 times the drawer driving pulse when sending it
continuously.

Be sure to use the printer power supply (connector pin 4) for the drawer power
source.

Do not insert a telephone line into the drawer-kick connector.

Doing so may damage the telephone line or printer.
Drawer-kick